Utilization of Waste Jari

Authors

  • A. Ashok Kumar Department of Textile Technology, Bannari Amman Institute of Technology, Sathyamangalam, India
  • K. T. Suresh 1,2,3,4Department of Textile Technology, Bannari Amman Institute of Technology, Sathyamangalam, India
  • T. Sundar Department of Textile Technology, Bannari Amman Institute of Technology, Sathyamangalam, India
  • I. Surya Department of Textile Technology, Bannari Amman Institute of Technology, Sathyamangalam, India

Keywords:

Wastage of jari, variety of jari, collection of jari, grinding the waste, coating over the fabric, epoxy resin, adhesion and strength, stiffness, tensile strength, thickness test

Abstract

The motivation behind this project is how to utilize waste jari on fabrics. Real jari, Imitation jari and Metallic jari these are the variety of jari. Jari are mainly used in sarees, dhoti, lehengas and kurtas. Jari are mainly used in sarees, kurtas lehengas and dhoti. Mostly, wastage of jari comes from sarees puttas. In this project, the waste jari is utilized by a grinding method. Resin used for this experiment is epoxy resin. These are the resins are used for applying on the fabric by coating method then pore the waste grinder jari on that fabric. And resin epoxy is applies on the fabric by method of manual and padding method. Test taken for the sample are stiffness, tensile strength and thickness test.

Downloads

Published

2021-06-05

How to Cite

[1]
A. Ashok Kumar, K. T. Suresh, T. Sundar, and I. Surya, “Utilization of Waste Jari”, IJRAMT, vol. 2, no. 5, pp. 25–28, Jun. 2021.

Issue

Section

Articles