IoT Based Charging Station for E-Vehicle Using Solar and PIC Microcontroller

Authors

  • A. Asha Department of Electronics and Communication Engineering, Rajalakshmi Engineering College, Chennai, India
  • Kakuluru Venkata Sundeep Department of Electronics and Communication Engineering, Rajalakshmi Engineering College, Chennai, India
  • S. Mukul Govind Department of Electronics and Communication Engineering, Rajalakshmi Engineering College, Chennai, India
  • Nagareddy Pratheep Reddy Department of Electronics and Communication Engineering, Rajalakshmi Engineering College, Chennai, India
  • Bhargav Sunkara Department of Electronics and Communication Engineering, Rajalakshmi Engineering College, Chennai, India

Keywords:

PIC-Microcontroller, LDR, Boost converter, GSM module

Abstract

This project is concerning charging E-vehicle modules exploitation the solar battery, accessibility of most power is viewed by IOT device and therefore the most power generated by the sun is being tracked exploitation the utmost outlet pursuit controller. The whole setup is connected to the PIC microcontroller, the battery level, generated and distributed associate in the quantity of the battery is viewed exploitation associate in liquid crystal display. GSM electronic equipment is employed to get Associate in alert messages for any reduction of power occurring within the system. A web page is employed to see the provision standing of charge, the number of power transferred to the charging module and therefore the obtainable location for the charging station can be displayed. The best plan of this project is to cut back on greenhouse emissions and fuel.

Downloads

Download data is not yet available.

Downloads

Published

2021-04-02

How to Cite

[1]
A. Asha, K. V. Sundeep, S. M. Govind, N. P. Reddy, and B. Sunkara, “IoT Based Charging Station for E-Vehicle Using Solar and PIC Microcontroller”, IJRESM, vol. 4, no. 3, pp. 136–138, Apr. 2021.

Issue

Section

Articles