Power Flow Control in Transmission Line by Using UPFC

Authors

  • Manish Srivastava Department of Electrical and Electronics Engineering, Galgotias College of Engineering and Technology, Greater Noida, India
  • Prakhar Singh Department of Electrical and Electronics Engineering, Galgotias College of Engineering & Technology, Greater Noida, India
  • Sandeep Verma Department of Electrical and Electronics Engineering, Galgotias College of Engineering & Technology, Greater Noida, India
  • Prince Singh Department of Electrical and Electronics Engineering, Galgotias College of Engineering & Technology, Greater Noida, India

DOI:

https://doi.org/10.47607/ijresm.2021.670

Keywords:

UPFC, FACTS, STATCOM, SSSC

Abstract

The power transfer capacity of electrical transmission lines is typically constrained by the capacity of large signals. Economic considerations such as the high cost of long lines and the income from the supply of additional power make it possible to pursue both economically and technically viable ways to increase the stability cap intensively. On the other hand, the production of efficient ways to use the full thermal capacity of transmission systems. The power industry has already begun to be affected by fast development in the field of power electronics. This is one direct consequence of the idea of aspects of FACTS, which has become possible due to the progress realized in power electronic devices. In theory, the FACTS devices can provide rapid control of real and Var power through transmission line. The UPFC is a FACTS family member with very appealing characteristics. Many parameters can be independently controlled by this unit. An alternative means of minimizing transmission system oscillations is given by this unit. The choice of input signals and the adopted control strategy for this system in order to dampen power oscillations in an efficient and robust manner are an important issue. In order to achieve the maximum desire effect in solving the first swing stability problem, the UPFC parameters can be regulated. In bulky power transmission systems with long transmission lines, this problem arises. A MATLAB Simulink Model with UPFC to test the efficiency of the electrical transmission system is considered in this paper. The main purpose of this analysis paper is to research different studies performed in the past to minimize UPFC transmission line losses.

Downloads

Download data is not yet available.

Downloads

Published

2021-04-28

How to Cite

[1]
M. Srivastava, P. Singh, S. Verma, and P. Singh, “Power Flow Control in Transmission Line by Using UPFC”, IJRESM, vol. 4, no. 4, pp. 126–129, Apr. 2021.

Issue

Section

Articles